Request MPW readiness review
MPW services for global chip teams

55nm MPW services

Plan a 55nm MPW with MST: process and PDK review, 2027 HHGrace shuttle planning, packaging and test scope, and a project quotation for global chip teams.

Start with a work email and a short project description. Detailed technical inputs can follow in the project discussion.

HHGrace 2027 MPW schedule

Process node Planned months in 2027
55nm January · May · September

Process options, GDS submission deadlines and delivery dates are confirmed for each project.

How can I start a 55nm MPW project with MST?

Start with your work email and a short description of the chip you want to prototype. MST coordinates 55nm process-fit review, the NDA/PDK path, project quotation and shuttle planning. The current HHGrace 2027 monthly plan covers January, May and September; the selected process option and project data deadline are confirmed during the review.

Which 55nm process does your design need?

A 55nm project may be driven by logic integration, embedded memory, analog interfaces or RF requirements. Start with the blocks the chip must contain, then check them against one identified process option. A logic library, flash macro and RF device menu cannot be assumed to belong to the same PDK.

Design requirementWhat to defineWhat the process review checks
Logic and mixed signalClock/performance targets, power modes, core and I/O voltages, analog interfaces and estimated area.Compatible standard-cell libraries, SRAM/ROM compilers, device models and signoff corners.
Embedded flash / eFlashMemory size, endurance, retention, programming method, temperature range and security functions.An eligible eFlash process and macro, licensing terms, controller/interface needs and the programming/test flow.
RF and precision analogFrequency range, noise/linearity targets, passive devices, isolation and package parasitics.Models covering the operating conditions and a package/test plan that can measure the intended performance.
Specialty-device requirementAny required high-voltage, BCD or SiGe device must be named explicitly.The actual foundry, device option and access route. A 55nm or RF label by itself does not establish a BCD or SiGe offering.

Read the detailed 55nm, 90nm and 40nm process-fit guide →

55nm or 90nm for your first silicon?

Compare the eligible process options against the same design brief. An existing 55nm IP/library set or embedded-memory requirement may drive one route; a different analog or power-device requirement may drive another. Compare implementation area, required devices, design effort, verification and the complete sample-delivery scope before choosing.

Explore 90nm MPW services →

What your quotation should cover

A useful quotation names the agreed work and deliverables. The following checklist helps the engineering and purchasing teams compare the same scope.

Process and design area

The exact foundry/process option, die dimensions, booked block area, required libraries and licensed IP. Die area and the billable MPW allocation should be identified separately.

Fabrication and sample delivery

The manufacturing scope, wafer or die delivery form, agreed quantity, acceptance criteria and accompanying records. Confirm whether thinning, dicing and shipment are included.

Packaging and test

Package development, assembly, wafer probe, final test and characterization are separate scope decisions. State the required measurements and reports so the quotation describes comparable work.

Project terms

Engineering work, third-party charges, tax, freight, quotation validity and payment milestones are specified in the written quotation. Confirm the assumptions that can change the scope.

Receive the commercial quotation through your private MST project discussion.

From requirements to samples

Use a shared scope and handoff record across design, fabrication and downstream work. The quotation determines which stages MST coordinates for your project.

StageWork and responsibilityStage output to confirm
RequirementsMST organizes the application, node/process, sample and timing assumptions into a project brief.A requirements summary with missing inputs and the next technical questions.
Process and PDKMST coordinates the foundry review and NDA/PDK access path for the proposed project.Exact process option, permitted PDK/library revisions and acceptance requirements.
Quotation and runMST aligns the manufacturing scope, sample form and downstream work with the proposed shuttle.A written quotation and project-specific data deadline and schedule assumptions.
Tapeout handoffThe design owner supplies the approved design revision and verification evidence through the agreed controlled channel.A versioned handoff list and confirmation of design acceptance for the run.
Fabrication and downstream workMST follows up manufacturing and any separately agreed dicing, packaging or testing.Progress against the agreed milestones and the scope of any changes.
Samples and evaluationThe agreed material and supporting records are handed over for the customer’s evaluation.Delivery quantity/form, available test records and the next evaluation or respin decision.

After first-silicon evaluation, use the measured results to decide whether to revise the design, join another MPW or investigate a dedicated production run. The next manufacturing stage is scoped separately.

An example first enquiry

Use the parts you already know; an initial message does not need to answer every technical question.

We are planning a 55nm prototype for [application]. We need [logic / embedded memory / analog functions]. Our estimated die size is [dimensions or unknown], with [sample target] and [package/test assumptions]. We are targeting the [January / May / September] 2027 plan. Our PDK and design status is [status]. Please advise the process review and quotation inputs.

Keep GDS, PDK files, proprietary schematics and other design IP for the agreed NDA and controlled transfer path.

Request a 55nm MPW quote →

Tools and practical preparation

PDK readiness checklist

Check the PDK version, library and licensing questions before implementation.

Open tool →

MPW Node Selection Advisor

Organize functional requirements and compare the questions to ask about candidate nodes.

Open tool →

MPW quotation comparison

Compare the scope and assumptions in quotations you already have.

Open tool →

These resources help organize assumptions and checks. The design owner and foundry approve the actual design and process handoff.

Read the MPW community guides on preparation, quotation scope, handoff, packaging and test →

55nm MPW questions

Can I enquire about 55nm MPW before final GDS?

Yes. A first enquiry starts with a work email and a short description of your requirement. Estimated area, sample needs and design status help subsequent scoping and can follow in the project discussion. Final design data and signoff evidence belong to the later controlled handoff.

What are the 2027 55nm MPW shuttle months?

MST’s current HHGrace 2027 plan lists January, May and September for 55nm. The applicable process option, booking or data deadline and delivery milestones are confirmed for each project. The months are planning windows, not sample arrival dates.

Can a 55nm eFlash MPW request use the same flow as logic?

The embedded-memory option, macro, programming conditions, reliability targets and licensing must be identified. MST can coordinate the review of these requirements; a logic-only PDK or a node listing does not confirm that the required flash option is available on the selected run.

What determines the scope of a 55nm MPW quotation?

The exact process, booked area, sample form and quantity, engineering/IP work, dicing, packaging, test and shipment define the scope. MST provides the project-specific commercial quotation privately after those assumptions are reviewed.

Does a 55nm MPW include packaged and tested chips?

The agreed quotation defines the delivery form. Wafer fabrication, dicing, packaging, wafer probe and final test must each be identified as included, separately quoted or unnecessary for the project.

Process information and the MST service role

MST coordinates process review, quotation and project follow-up for global chip teams. For the HHGrace route, MST is a non-exclusive customer-access and project-coordination agent. Exact process eligibility, PDK access, capacity and project acceptance are confirmed with the responsible foundry.

The Hua Hong 2025 annual report, page 38 describes company-level technology platforms. Use it alongside the process-fit guide when preparing questions about a particular project. The 2027 monthly plan is maintained separately in MST’s MPW schedule overview.

Content updated . About Moore Solution Technology.